OpenGL man pages
glLightf, glLighti, glLightfv, glLightiv - set light source parameters
void glLightf( GLenum light, GLenum pname, GLfloat param ) void glLighti( GLenum light, GLenum pname, GLint param )
light Specifies a light. The number of lights is depends on the implementation, but at least eight lights are supported. They are identified by symbolic names of the form GL_LIGHTi where 0 <= i < GL_MAX_LIGHTS. pname Specifies a single-valued light source parameter for light. GL_SPOT_EXPONENT, GL_SPOT_CUTOFF, GL_CONSTANT_ATTENUATION, GL_LINEAR_ATTENUATION , and GL_QUADRATIC_ATTENUATION are accepted. param Specifies the value that parameter pname of light source light will be set to.
void glLightfv( GLenum light, GLenum pname, const GLfloat *params ) void glLightiv( GLenum light, GLenum pname, const GLint *params )
light
Specifies a light. The number of lights depends on the
implementation, but at least eight lights are supported. They are
identified by symbolic names of the form GL_LIGHTi where 0 <= i <
GL_MAX_LIGHTS.
pname
Specifies a light source parameter for light. GL_AMBIENT, GL_DIFFUSE,
GL_SPECULAR, GL_POSITION, GL_SPOT_DIRECTION, GL_SPOT_EXPONENT,
GL_SPOT_CUTOFF, GL_CONSTANT_ATTENUATION, GL_LINEAR_ATTENUATION, and
GL_QUADRATIC_ATTENUATION are accepted.
params
Specifies a pointer to the value or values that parameter pname of
light source light will be set to.
glLight sets the values of individual light source parameters. light names the light and is a symbolic name of the form GL_LIGHTi, where 0 <= i < GL_MAX_LIGHTS. pname specifies one of ten light source parameters, again by symbolic name. params is either a single value or a pointer to an array that contains the new values. Lighting calculation is enabled and disabled using glEnable and glDisable with argument GL_LIGHTING. When lighting is enabled, light sources that are enabled contribute to the lighting calculation. Light source i is enabled and disabled using glEnable and glDisable with argument GL_LIGHTi. The ten light parameters are as follows: GL_AMBIENT params contains four integer or floating-point values that specify the ambient RGBA intensity of the light. Integer values are mapped linearly such that the most positive representable value maps to 1.0, and the most negative representable value maps to -1.0. Floating- point values are mapped directly. Neither integer nor floating-point values are clamped. The default ambient light intensity is (0.0, 0.0, 0.0, 1.0). GL_DIFFUSE params contains four integer or floating-point values that specify the diffuse RGBA intensity of the light. Integer values are mapped linearly such that the most positive representable value maps to 1.0, and the most negative representable value maps to -1.0. Floating- point values are mapped directly. Neither integer nor floating-point values are clamped. The default diffuse intensity is (0.0, 0.0, 0.0, 1.0) for all lights other than light zero. The default diffuse intensity of light zero is (1.0, 1.0, 1.0, 1.0). GL_SPECULAR params contains four integer or floating-point values that specify the specular RGBA intensity of the light. Integer values are mapped linearly such that the most positive representable value maps to 1.0, and the most negative representable value maps to -1.0. Floating- point values are mapped directly. Neither integer nor floating-point values are clamped. The default specular intensity is (0.0, 0.0, 0.0, 1.0) for all lights other than light zero. The default specular intensity of light zero is (1.0, 1.0, 1.0, 1.0). GL_POSITION params contains four integer or floating-point values that specify the position of the light in homogeneous object coordinates. Both integer and floating-point values are mapped directly. Neither integer nor floating-point values are clamped. The position is transformed by the modelview matrix when glLight is called (just as if it were a point), and it is stored in eye coordinates. If the w component of the position is 0.0, the light is treated as a directional source. Diffuse and specular lighting calculations take the light's direction, but not its actual position, into account, and attenuation is disabled. Otherwise, diffuse and specular lighting calculations are based on the actual location of the light in eye coordinates, and attenuation is enabled. The default position is (0,0,1,0); thus, the default light source is directional, parallel to, and in the direction of the -z axis. GL_SPOT_DIRECTION params contains three integer or floating-point values that specify the direction of the light in homogeneous object coordinates. Both integer and floating-point values are mapped directly. Neither integer nor floating-point values are clamped. The spot direction is transformed by the inverse of the modelview matrix when glLight is called (just as it it were a normal), and it is stored in eye coordinates. It is significant only when GL_SPOT_CUTOFF is not 180, which it is by default. The default direction is (0,0,-1). GL_SPOT_EXPONENT params is a single integer or floating-point value that specifies the intensity distribution of the light. Integer and floating-point values are mapped directly. Only values in the range [0,128] are accepted. Effective light intensity is attenuated by the cosine of the angle between the direction of the light and the direction from the light to the vertex being lighted, raised to the power of the spot exponent. Thus, higher spot exponents result in a more focused light source, regardless of the spot cutoff angle (see next paragraph). The default spot exponent is 0, resulting in uniform light distribution. GL_SPOT_CUTOFF params is a single integer or floating-point value that specifies the maximum spread angle of a light source. Integer and floating-point values are mapped directly. Only values in the range [0,90], and the special value 180, are accepted. If the angle between the direction of the light and the direction from the light to the vertex being lighted is greater than the spot cutoff angle, the light is completely masked. Otherwise, its intensity is controlled by the spot exponent and the attenuation factors. The default spot cutoff is 180, resulting in uniform light distribution. GL_CONSTANT_ATTENUATION GL_LINEAR_ATTENUATION GL_QUADRATIC_ATTENUATION params is a single integer or floating-point value that specifies one of the three light attenuation factors. Integer and floating-point values are mapped directly. Only nonnegative values are accepted. If the light is positional, rather than directional, its intensity is attenuated by the reciprocal of the sum of: the constant factor, the linear factor times the distance between the light and the vertex being lighted, and the quadratic factor times the square of the same distance. The default attenuation factors are (1,0,0), resulting in no attenuation.
It is always the case that GL_LIGHTi = GL_LIGHT0 + i.
GL_INVALID_ENUM is generated if either light or pname is not an accepted value. GL_INVALID_VALUE is generated if a spot exponent value is specified outside the range [0,128], or if spot cutoff is specified outside the range [0,90] (except for the special value 180), or if a negative attenuation factor is specified. GL_INVALID_OPERATION is generated if glLight is executed between the execution of glBegin and the corresponding execution of glEnd.
glGetLight glIsEnabled with argument GL_LIGHTING
glColorMaterial, glLightModel, glMaterial
Introduction | Alphabetic | Specification
Last Edited:
Fri Dec 6 11:18:03 EST 1996
by
AFV
Look here for legal stuff: Legal